Mining

 

 

Mining                                          

 

Ask for a quote Visit website
Find dealers / rentals

Write a review

VN-300 Surface Mount Dual Antenna GNSS/INS


 
General 
Product Name:VN-300 Surface Mount Dual Antenna GNSS/INS
Product Description:The VN-300 is a miniature high-performance dual GNSS-Aided Inertial Navigation System that combines MEMS inertial sensors, two high-sensitivity GNSS receivers, and advanced Kalman filtering algorithms to provide optimal estimates of position, velocity, and orientation for industrial applications. By utilizing two separate GNSS receivers and antennas the VN-300 enables accurate heading measurements without reliance on vehicle dynamics or magnetic sensors, providing unmatched performance under both static and dynamic conditions.
Type of application:Air, Land, Marine
Year of initial development:2015
Height [m]:0.003
Width [m]:0.022
Length [m]:0.024
Weight [kg]:0.005
Min. Voltage (AC):
Max. Voltage (AC):
Min. Voltage (DC):3.2
Max. Voltage (DC):5.5
Power consumption [W]:1.2
Splashproof casting:N
Water resistant casting:N
Water resistance [m]:
Mean time between failures [hr]:
Type of accelerometer:3-axis MEMS
Type of gyro:3-axis MEMS
Removable from base plate:N
Moving parts:N
Environmental 
Non-operating shock tolerance [g]:
Operating shock tolerance [g]:
Min. operating temperature [C]:-40
Max. operating temperature [C]:85
Max. rotation speed [deg/s]:2000
Data formats 
NMEA formats:RMC, GGA, GLL, GSA, GSV, HDG, HDT, THS, VTG, ZDA
RTCM:
Other :
GNSS Positioning Sensor 
Number of integrated GNSS receivers and antenna ports:2
No. channels p receiver:72
Tracked satellite signals:GPS L1, GLONASS L1, Galileo E1
SBAS differential signals:Y
RTK Network Compatibility:N
Update rate [ Hz ]:5
Cold start [ seconds ]:26
Hot start [ seconds ]:1
GNSS positional accuracy 
Horizontal Position Accuracy [ RMS in cm ] :250
Horizontal Position Accuracy (SBAS) [ RMS in cm ]:200
Horizontal Position Accuracy (RTK) [ RMS in cm ]:
GNSS aided uncertainty 
Heading [deg]:0.3
Pitch [deg]:0.1
Roll [deg]:0.1
Heave: constant part [m]:
Heave: variable part [%]:
Surge/sway [m]:
Increase in position uncertainty w.r.t. stand-alone GPS [m]:
EM log aided uncertainty 
Heading [deg]:
Pitch [deg]:
Roll [deg]:
Heave [m]:
Surge/sway [m]:
Decrease in position accuracy [m/hr]:
Doppler log aided uncertainty 
Heading [deg]:
Pitch [deg]:
Roll [deg]:
Heave [m]:
Surge/sway [m]:
Decrease in position accuracy [m/hr]:
Unaided uncertainty 
Heading [deg]:2
Pitch [deg]:0.5
Roll [deg]:0.5
Heave [m]:
Surge/sway [m]:
Decrease in position accuracy [m/hr]:
Inertial Measurement Unit 
Accelerometer bias [µ-g]:40
gyro bias [deg/hr]:5
Calibration procedure:Calibrated at room temperature or over full thermal operating range (-40 C to +85 C) for bias, scale factor, misalignment and gyro g-sensitivity.
Software 
Name:
Filtering:Y
Adaptable filter strength:
Adaptable input signals:
Integrity monitoring of position input:
Integrity monitoring of log input:
Max. number of position input signals:
Max. number of log input signals:
Maximum latency of position input [ms]:
Maximum latency of log input [ms]:
Uncertainty indicators given in output:
Uncertainty of time stamp for output [ms]:
Other specifications 
Export restrictions:ITAR free
Graphical user interface:Y
Typical application:Camera/Antenna Stabilization, UAVs, UAS, Ground Vehicles, Mapping
Distinguishable features:Onboard GNSS-Compass, SWaP-C optimized, surface mount design, calibrated over temperature, onboard Extended Kalman Filter, automatic filter initialization & dynamic alignment, external GPS, accurate heading under static and dynamic conditions
 


Ask for a quote Visit website
Find dealers / rentals


Supplier Information

 

 

Other products in Inertial Navigation Systems
Download the Brochure
Product Manual